Nexcom FTA 5180 Series User Manual page 48

Chapter 3: BIOS Setup
Controller 3 SATA Configuration Cont.
Aptio Setup - AMI
Platform Configuration
Controller 3 SATA Configuration
SATA Configuration [Enabled]
SATA Port 1 [Not Installed]
Port 1 [Enabled]
Hot Plug [Disabled]
SATA Port 3 [Not Installed]
Port 3 [Enabled]
Hot Plug [Disabled]
Version 2.22.1283. Copyright (C) 2022 AMI
Port 1
Enables or disables Serial ATA port 1.
Port 3
Enables or disables Serial ATA port 3.
Hot Plug
Enables or disables hot plugging feature on Serial ATA port 1 or 3.
Copyright © 2022 NEXCOM International Co., Ltd. All Rights Reserved.
USB Configuration
SATA test settings
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
USB Port Disable Override
Enables or disables the USB port from reporting a device connection to the
controller.
35
Aptio Setup - AMI
Platform Configuration
USB Configuration
USB Port Disable [Disabled]
Override
Version 2.22.1283. Copyright (C) 2022 AMI
Selectively
Enable/Disable the
corresponding USB port
from reporting a Device
Connection to the
controller.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
FTA5180 Series User Manual