Nexcom FTA 5180 Series User Manual page 53

Chapter 3: BIOS Setup
Common RefCode Configuration
Aptio Setup - AMI
Common RefCode Configuration
----------------------------------------------------------------------------------
------
[Auto]
MMCFG Size
MMIO High Base [2T]
MMIO High Granularity [64G]
Size
[Disable]
Virtual Numa
Version 2.22.1283. Copyright (C) 2022 AMI
MMCFG Size
Select MMCFG size.
Virtual Numa
Enables or disables Non-Uniform Memory Access support.
Copyright © 2022 NEXCOM International Co., Ltd. All Rights Reserved.
Socket Configuration
Select MMCFG Size
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Memory Configuration
Aptio Setup - AMI
----------------------------------------------------------------------------------
------
Integrated Memory Controller (iMC)
----------------------------------------------------------------------------------
------
Memory Frequency
[Auto]
Memory Topology
Version 2.22.1283. Copyright (C) 2022 AMI
Memory Frequency
Configures the maximum frequency of the memory. Do not select Reserved.
40
Socket Configuration
Maximum Memory
Frequency Selections in
Mhz. If Enforce POR is
disabled, user will be
able to run at higher
frequencies than the
memory support (limited
by processor support).
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
FTA5180 Series User Manual