Nexcom DFA1163 User Manual page 64

Chapter 4: BIOS Setup
USB HS Port 3
Aptio Setup Utility - Copyright (C) 2021 American Megatrends, Inc.
Main Advanced IntelRCSetup Security
USB HS Physical Connector [Enabled]
Version 2.19.1266. Copyright (C) 2021 American Megatrends, Inc.
USB HS Physical Connector
Enables or disables the USB Physical Connector (physical port). Once
disabled, any USB devices plugged into the connector will not be detected
by BIOS or OS.
Copyright © 2021 NEXCOM International Co., Ltd. All Rights Reserved.
Boot Save & Exit
Enable/Disable this USB Physical
Connector (physical port).
Once disabled, any USB devices
plug into connector will not be
detected by BIOS or OS.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
IQAT Configuration
Aptio Setup Utility - Copyright (C) 2021 American Megatrends, Inc.
Main Advanced IntelRCSetup
IQAT
Set IQAT FUSECTL
Set 64B MRR/MPL
Version 2.19.1266. Copyright (C) 2021 American Megatrends, Inc.
IQAT
Enables or disables hiding of IQAT device from an OS.
Set IQAT FUSECTL
Enables or disables the configuration of IQAT FUSECTL register.
Set 64B MRR/MPL
Enables or disables the configuration of 64B MRR/MPL in IQAT DevCTL
register.
48
Save & Exit
Security Boot
[Enabled]
Hides IQAT device from an OS
[Disabled]
[Enabled]
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
DFA1163 User Manual