Chapter 3: System Setup; Removing The Chassis Cover - Nexcom DFA1163 User Manual

Chapter 3: System Setup

C 3: s
haPter ystem

Removing the Chassis Cover

Prior to removing the chassis cover, make sure the unit's power
CAUTION! CAUTION!
CAUTION!
is off and disconnected from the power sources to prevent
electric shock or system damage.
1. The screws on the bottom and sides of the cover are used to secure the
cover to the chassis. Remove these screws and put them in a safe place
for later use.
Screws on the bottom
Copyright © 2021 NEXCOM International Co., Ltd. All Rights Reserved.
s
etuP
19
Screws on the sides
DFA1163 User Manual