Nexcom DFA1163 User Manual page 51

Chapter 4: BIOS Setup
SERR# Generation
Enables or disables the PCI device to generate SERR#.
Above 4G Decoding
Enables or disables decoding of 64-bit devices in 4G address space.
SR-IOV Support
Enables or disables SR-IOV support.
BME DMA Mitigation
Enables or disables the function to re-enable bus master attribute during PCI
enumeration for PCI bridges after SMM is locked.
Copyright © 2021 NEXCOM International Co., Ltd. All Rights Reserved.
PCI Express Settings
Aptio Setup Utility - Copyright (C) 2021 American Megatrends, Inc.
Advanced
PCI Express Device Register Settings
Relaxed Ordering
Extended Tag
No Snoop
Maximum Payload
Maximum Read Request
PCI Express Link Register Settings
ASPM Support
WARNING: Enabling ASPM may cause some
PCI-E devices to fail
Extended Synch
Link Training Retry
Link Training Timeout
Unpopulated Links
Version 2.19.1266. Copyright (C) 2021 American Megatrends, Inc.
Relaxed Ordering
Enables or disables the PCI Express device's relaxed ordering.
Extended Tag
When this function is enabled, it allows a device to use 8-bit tag field as a
request.
No Snoop
Enables or disables the PCI Express device's no snoop option.
35
Enables or Disables PCI Express
Device Relaxed Ordering.
[Enabled]
[Disable]
[Enabled]
[1024 Bytes]
[256 Bytes]
[Disable]
[Disable]
→←: Select Screen
[5]
↑↓: Select Item
1000
Enter: Select
[Keep Link ON]
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
DFA1163 User Manual