Loading - PRONAR T400 Operator's Manual

CHAPTER 4

4.4 LOADING

Loading the load box can only take place when the trailer is connected to the tractor and
placed on level ground. The load should be evenly distributed in the load box. This will
ensure proper stability of the trailer while driving and correct axle and drawbar eye load. It is
recommended to use a loader or conveyor when loading. Loading of silage in the field can be
done directly from a forage harvester or combine harvester.
Figure 4.2 Front tilting extension
(1) front tilting extension, (2) hydraulic cylinder
ATTENTION
It is forbidden to exceed the trailer's maximum load capacity as it endangers safety during
travel and may cause damage to the machine.
The load in the trailer's load box must be distributed evenly and must not hinder driving.
Loading work should be carried out by a person experienced in this type of work.
4.9
Pronar T400