Air Pressure Control, Tires And Rims Technical Condition Inspection - PRONAR T400 Operator's Manual

CHAPTER 5
WHEEL TIGHTENING TORQUE
[NM]
570
Checking wheel nuts tightness:
In case of intensive use of the trailer, the inspection should be carried out at least every
10,000 km.
5.2.5 AIR PRESSURE CONTROL, TIRES AND RIMS TECHNICAL CONDITION
INSPECTION
The tire pressure should be checked after changing the spare wheel and at least once a
month. In case of intensive use, it is recommended to check the air pressure more often. The
trailer must be unloaded during control. Control should be carried out before driving, when
the tires are not warm, or after a long standstill of the machine.
TIP
The value of the tire pressure is specified on the information label, placed on the rim or
upper frame, above the trailer wheel.
When checking pressure, pay attention to the technical condition of rims and tires. Look
carefully at the side surfaces of the tires and check the condition of the tread.
DANGER
OPERATOR'S WEIGHT
• after the first use of the trailer,
• after the first use with load,
• after covering the first 1,000 km and every 6 months of use or every 25,000
km.
(F)
[KG]
90
75
65
60
5.9
Pronar T400
KEY LENGTH (L)
[M]
0.65
0.75
0.88
0.95