Table of Contents
Advertisement
SECTION 2
• After changing the hydraulic oil, the used oil should be properly disposed of. Used
oil or oil, which has lost its properties, should be stored in original containers or
replacement containers resistant to action of hydrocarbons. Replacement
containers must be clearly marked and appropriately stored.
• Do not store hydraulic oil in packaging designed for storing food or foodstuffs.
• Rubber hydraulic lines must be replaced every 4 years regardless of their
technical condition.
2.1.5 LOADING AND UNLOADING
• Loading and unloading work should be carried out by someone experienced in
this type of work.
• Before loading make certain that linking cables are laid and properly secured. If
the loaded material does not exert any pressure on the trailer sides it is permitted
to dismantle clamping cable. If pressure is exerted it may cause damage to trailer
sides.
• Use only original tipping pins with a handle. Using third-party pins could damage
the trailer.
• The trailer is not intended for transporting people, animals or hazardous
materials.
• The load must be arranged in such a way that it does not threaten the stability of
the trailer, and does not hinder driving.
• The arrangement of the load may not cause an overload on the axle and drawbar
of the trailer.
• Incorrect load distribution and overloading the machine may cause the trailer to
tip over or cause damage to its components.
• Do NOT climb on load box during loading and unloading.
• Unloading and loading of trailer may only take place when the machine is
positioned on level and hard surface and connected to tractor. Tractor and trailer
must be placed to drive forwards.
2.5
Pronar T683
Advertisement
Table of Contents
