Tires - PRONAR T400 Operator's Manual

Pronar T400
• Make sure that there are no bystanders in the unloading area or the tailgate being
raised. Ensure proper visibility before unloading and ensure that there are no
other people nearby.
• Keep a safe distance from overhead electric lines when raising the tailgate.
• Opening the tailgate and unloading by means of the floor conveyor can only be
carried out when the trailer is coupled with the tractor.
• Take special care when unloading using dosing drums, pay attention to the
correct operation of the power transmission mechanism.
• If during the operation of the floor conveyor the load does not pour, stop
unloading immediately. Reloading is only possible after removing the clogging or
failure.
• Take particular care when closing the tailgate as there is a risk of being crushed.
• It is forbidden to operate the floor conveyor mechanism and trailer dosing drums
for unloading with the tailgate closed.
• Be especially careful when operating the floor conveyor mechanism due to the
danger of being pulled in.
• During winter, pay special attention to loads that may freeze during transport. The
frozen load may damage the trailer.
• After unloading, make sure the load box is empty.
• Before unloading the trailer make sure that the PTO shaft rotates in the right
direction.
• It is forbidden to drive with the tailgate raised.

2.1.7 TIRES

• When working with tires, the trailer should be immobilized with the parking brake
and secured against rolling away by placing chocks under the wheels. The wheel
can be dismantled only when the trailer is not loaded.
• Repair work on wheels or tires should be carried out by persons trained and
authorized to do so. These works should also be carried out using appropriately
selected tools.
2.10
CHAPTER 2