Mounting And Dismounting The Wheel, Checking Bolt Connections - PRONAR T400 Operator's Manual

Pronar T400
Secure castellated nut with cotter pin and mount hub cover.
Gently tap the hub with a rubber or wooden hammer.
Figure 5.2 Axle bearings adjustment
(1) hub cover, (2) castellated nut, (3) cotter pin
TIP
If the wheel is dismounted, bearing clearance is easier to check and adjust.
5.2.4 MOUNTING AND DISMOUNTING THE WHEEL, CHECKING BOLT
CONNECTIONS
Wheel dismounting
Immobilize trailer with parking brake.
The nut may not be tightened too much. It is not recommended to
apply too much force due to deterioration of the operating conditions
of the bearings.
5.6
CHAPTER 5