PRONAR T400 Operator's Manual page 76

Table of Contents

Advertisement

Pronar T400
Lowering the support
Remove the safety pin.
Pull the foot out of the support body.
Reinsert the locking pin.
Turning the crank clockwise, lower the support to the ground, or adjust the
height of coupling in relation to the hitch (if the trailer is to be coupled with the
tractor).
Figure 4.1
Support foot
(1) support, (2) foot, (3) safety pin, (4) mechanical gear, (A) raising, (B) lowering
ATTENTION
It is forbidden to leave the uncoupled and loaded trailer supported by the support at
standstill.
Before driving off make sure that the support is set in driving position and locked with a
safety bolt.
4.8
CHAPTER 4

Advertisement

Table of Contents
loading

Table of Contents