Table of Contents
Advertisement
Pronar T400
types of oil may cause damage to the trailer or agricultural tractor. The new machine is filled
with L HL32 Lotos hydraulic oil.
Table 5.5
Hydraulic oil characteristic - L-HL 32 Lotos
NO.
1
Viscosity classification according to ISO 3448VG
2
Kinematic viscosity in 40
3
Grade classification according to ISO 6743/99
4
Grade classification according to DIN 51502
5
Flash-point
If it is necessary to change the hydraulic oil, read the oil manufacturer's instructions carefully.
If he recommends flushing the system with an appropriate preparation, follow these
recommendations. It is important to ensure that chemicals used for this purpose do not act
aggressively on the materials of the hydraulic system. During normal operation of the trailer,
it is not necessary to change the hydraulic oil, however, if necessary, this operation should be
entrusted to specialist service points.
The oil used, due to its composition, is not classified as a dangerous substance, however
long-term effects on the skin or eyes may cause irritation. In the event of contact of oil with
skin, wash the place of contact with water and soap. Do not use organic solvents (gasoline,
kerosene). Soiled clothing should be removed to prevent oil from getting on skin. If the oil
gets into eyes, flush them with large amount of water and in case of irritation contact your
doctor. Hydraulic oil under normal conditions is not harmful to the respiratory tract. The
hazard only occurs when the oil is strongly atomized (oil mist), or in the event of a fire during
which toxic compounds may be released. Oil should be quenched with carbon dioxide, foam
or extinguishing steam. Do not use water to extinguish the fire.
5.8.2
LUBRICANTS
For heavily loaded parts it is recommended to use lithium grease with the addition of
molybdenum disulphide (MOS2) or graphite. For less loaded components, it is recommended
to use general purpose machine greases that contain anti-corrosive additives and are highly
resistant to water washout. Aerosol preparations (silicone greases, anti-corrosive lubricants)
should have similar properties.
DESCRIPTION
0
C
5.36
CHAPTER 5
UNIT
VALUE
-
32
2
mm
/s
28.8 – 35.2
-
HL
-
HL
C
230
Advertisement
Table of Contents
