Loading And Unloading - PRONAR T663/1 Operator's Manual

SECTION 2
• After changing the hydraulic oil, the used oil should be properly disposed of. Used
oil or oil which has lost its properties should be stored in original containers or
replacement containers resistant to action of hydrocarbons. Replacement
containers must be clearly marked and appropriately stored.
• Do not store hydraulic oil in packaging designed for storing food or foodstuffs.
• Rubber hydraulic conduits must be replaced every 4 years regardless of their
technical condition.

2.1.5 LOADING AND UNLOADING

• Loading and unloading work should be carried out by persons experienced in this
type of work.
• Before loading make certain that linking cables are laid and release mechanism is
set in proper position and secured with the aid of cotter pin. If the loaded material
does not exert any pressure on the trailer sides it is permitted to dismantle
clamping cable. Otherwise, load exerting pressure on the walls will cause damage
to the walls.
• Use only original tipping pins with a handle. Use of non-original pins could
damage the trailer.
• The trailer is not intended for transporting people, animals or hazardous
materials.
• The load must be arranged in such a way that it does not threaten the stability of
the trailer and does not hinder driving.
• The arrangement of the load may not cause an overload on the axle and drawbar
of the trailer.
• Incorrect load distribution and overloading the machine may cause the trailer to
tip over or cause damage to its components.
• Do NOT climb on load box during loading and unloading.
• Unloading and loading of trailer may only take place when the machine is
positioned on level and hard surface and connected to tractor. Tractor and trailer
must be placed to drive forwards.
2.5
Pronar T663/1 T663/1 SILO