Table of Contents
Advertisement
Pronar T400
of the car carrying the trailer, the speed of travel and other conditions. Therefore, it is not
possible to specify the fastening plan in detail. A properly attached trailer will not change its
position relative to the transporting vehicle. The fastening means must be selected according
to the manufacturer's instructions.
Figure 1.3
Transport brackets positioning
(1) transport bracket, (2) lower frame crossbeams
ATTENTION
During road transport, the trailer must be mounted on the platform of the vehicle in
accordance with safety requirements and regulations.
While driving, the car driver should maintain extreme caution. This is due to the fact that
the center of gravity of the vehicle with the loaded machine is shifted upwards.
Use only approved and technically reliable securing measures. Read the operating
instructions of the fastener manufacturer.
In case of doubt, a greater number of attachment and securing points for the trailer should be
used. If necessary, protect the sharp edges of the trailer, thus securing the fastening means
against damage during transport.
1.12
CHAPTER 1
Advertisement
Table of Contents
