Table of Contents
Advertisement
Pronar T400
CHAPTER 3
Figure 3.9
Design and schematic sketch of the brake installation with automatic
braking force regulator
(1)) line connector, (2) control valve, (3) automatic brake force regulator, (4) relay valve,
(5) air tank, (6) pneumatic cylinder, (7) air filter, (8) air tank control connector, (9) drain valve
The automatic braking force regulator (3) adjusts the braking pressure depending on the load
of the trailer. During normal operation it requires no maintenance.
Each pneumatic connection is equipped with a shut-off valve, which automatically cuts off the
outflow of air from the pneumatic conduit in case of disconnection from the agricultural tractor
socket.
3.14
Advertisement
Table of Contents
