Disconnection From Tractor - PRONAR T400 Operator's Manual

CHAPTER 4
• It should be kept in mind that the braking distance of the set increases
significantly with the increase in the weight of the transported load and the
increase in speed.
• Reduce your speed sufficiently in advance of approaching bends, when driving on
uneven or sloping terrain.
ATTENTION
It is forbidden to drive on public roads with the tailgate raised.
• When reversing, lock the steering axle in the straight-ahead position.

4.7 DISCONNECTION FROM TRACTOR

In order to disconnect the trailer from the tractor, perform the following actions:
After stopping the tractor, immobilize the trailer with parking brake, Activate
the park brake with crank mechanism - see figure (3.12).
Place chocks under the rigid axle wheel.
Use the support to set the drawbar eye at the appropriate height - see section
4.3.1.
Reduce residual pressure in the hydraulic system by moving the appropriate
lever to control the hydraulic circuit of the tractor.
Turn off tractor engine. Close the tractor cabin and secure it against
unauthorized access.
Disconnect electric, hydraulic and braking system conduits from the tractor.
Protect the ends of these conduits pipes from contamination. Close the
hydraulic system's connectors with caps and place them in special holders
located on the trailer frame.
Close the pneumatic system connectors with caps and place on appropriate
holders located on the trailer frame.
Disconnect trailer drawbar eye from tractor's hitch and drive tractor away.
4.15
Pronar T400