Table of Contents
Advertisement
CHAPTER 3
Figure 3.10
Three-position manual regulator
(1) three-position braking force regulator, (2) regulator setup selection valve, (A), (B), (C)
regulator setup positions
TIP
The system is equipped with two pneumatic connections. They are marked with colored
protective covers, which enables identification of individual connections:
- red – supply line,
- yellow – control line.
Three-position braking force regulator - figure (3.10), used in pneumatic installations, adjusts
the braking force depending on the setting. Switching to the appropriate operating mode is
carried out manually by the machine operator using the lever (2) before starting to drive.
Three working positions are available: A - "No load", B - "Half load" and C - "Full load".
3.15
Pronar T400
Advertisement
Table of Contents
