Transmission Service - PRONAR T400 Operator's Manual

Pronar T400

5.13 TRANSMISSION SERVICE

All Pronar T400 trailer gears are filled with SAE 90 EP gear oil (API GL-5 SAE 80W / 90).
Table 5.6 T400 trailer gears
GEAR POSITION AND NUMBER
Power transmission mechanism
118-02.011.L
Conveyor mechanism
RT200 catalogue number 9358
Signs such as fresh oil stains and increased transmission noise may indicate that the oil level
is too low.
The oil level in the gears of the conveyor mechanism should be checked through
transparent sight glasses before each start of the machine.
Changing the oil should be carried out at the oil working temperature, when the machine is
running for a few minutes, then any impurities that are in the gearbox will mix with the oil and
then be drained with it.
Used hydraulic oil in gearboxes should be changed after the first 50 hours of operation,
subsequent changes should be made every 500 hours.
DANGER
During work related to oil control and oil change, use appropriate personal protective
equipment, i.e. protective clothing, footwear, gloves, glasses. Avoid oil contact with skin.
LUBRICANT TYPE
SAE 90 EP (API GL-5 SAE 80W/90)
5.44
CHAPTER 5
OIL AMOUNT
2.5L
2.5L