Loading And Unloading - PRONAR T700 Operator's Manual

SECTION 2
• After changing the hydraulic oil, the used oil should be properly disposed of. Used
oil or oil, which has lost its properties, should be stored in original containers or
replacement containers resistant to action of hydrocarbons. Replacement
containers must be clearly marked and appropriately stored.
• Do not store hydraulic oil in packaging designed for storing food or foodstuffs.
• Rubber hydraulic lines must be replaced every 4 years regardless of their
technical condition.

2.1.5 LOADING AND UNLOADING

• Unloading the trailer is done only by a tipping the load box to the rear.
• Unloading and loading of trailer may only take place when the machine is
positioned on level and hard surface and connected to tractor. Tractor and trailer
must be placed to drive forwards.
• Loading and unloading work should be carried out by someone experienced in
this type of work.
• The load must be arranged in such a way that it does not threaten the stability of
the trailer, and does not hinder driving.
• Do NOT drive with the load box raised.
• Ensure that during unloading / loading or raising the load box nobody is near the
trailer. Before tipping load box ensure that there is visibility and make certain that
there are no bystanders.
• The trailer is not intended for transporting people, animals or hazardous
materials.
• Keep a safe distance from overhead electric power lines during unloading and
when load box is raised.
• The arrangement of the load may not cause an overload on the axle of the trailer.
• Do NOT tip of the load box in windy conditions.
• When closing or opening the rear grain chute gate take particular care to avoid
crushing fingers.
2.5
Pronar T700