Safety While Aggregating The Machine - PRONAR T400 Operator's Manual

CHAPTER 2
• The trailer may only be used when all the covers and other protective
components are technically functional and correctly positioned. If the covers are
damaged or lost, they must be replaced with new ones.
• Before using the trailer always check its technical condition. In particular, check
the technical condition of the hitch system, chassis, the braking system and the
traffic lights as well as the tension of the conveyor chain.
• Climbing on the machine is only allowed when the trailer is absolutely stationary
and the tractor engine is switched off.

2.1.2 SAFETY WHILE AGGREGATING THE MACHINE

• Before connecting the trailer to the agricultural tractor, check the technical
condition of the machine and tractor hitching system, drive shaft, and connecting
elements of the hydraulic, pneumatic and electric system.
• It is forbidden to connect the trailer to the tractor if it does not meet the relevant
requirements. Before connecting the machine, make sure that the oil in both
machines can be mixed.
• Before connecting the trailer, make sure that the agricultural tractor and trailer are
technically functional.
• When connecting the trailer to the tractor, use the appropriate hitch for single-axle
trailers. After completing the coupling of the machine check the safety of the hitch.
Read the tractor operating instructions.
• Be especially careful when connecting the machine. Ensure proper visibility.
When hitching up, nobody is allowed to stay between tractor and the trailer.
• When repairing the trailer, uncoupling it from the tractor is forbidden, the rear
tailgate must be additionally secured against closing. When unhitching the trailer,
take particular care.
• Hitching and unhitching the trailer may only take place when the machine is
immobilized with the parking brake.
• After completing the coupling of the trailer, the drawbar support foot should be
raised to transport position.
2.3
Pronar T400