Fault Messages; Fill Time Exceeded; Drain Time Exceeded - Champion M2 Series Installation Manual

Fault Messages

FAULT MESSAGES:
• Operation errors are displayed on the main screen with prompts to guide the operator
through troubleshooting procedures and corrective actions.

FILL TIME EXCEEDED:

1. If the machine does not fill completely in the allotted
time then "FILL TIME EXCEEDED" and a blinking
fault icon appear, (Fig.99a and Fig. 99b).
2. Press the
Follow the instructions and press RESET, (Fig. 99c).
3. The machine will resume normal operation or the
fault screen will reappear.
4. Contact a service agent for repair.

DRAIN TIME EXCEEDED:

1. If the machine does not drain completely in the allotted
time then "DRAIN TIME EXCEEDED" and a blinking
fault icon appear, (Fig.100).
2. Press the blinking
will appear. Follow the instructions and press
ACKNOWLEDGE, (Fig. 100a).
3. If the drain fault is corrected then the machine will
resume normal operation; however, if the fault is not
corrected, the machine will resume normal operation
with the blinking icon as a prompt that the machine
is running in a drain fault condition and requires
repair.
4. Contact a service agent for repair.
Fig. 100b - Main screen - normal operation with error icon
34
icon and an instruction screen appears.
Fig. 99b - Fault screen with blinking icon
icon and an instruction screen
Fig. 99a - Normal FILLING operation screen
Fig. 99c - Follow instructions on screen
Fig. 100 - Error screen with blinking icon
Fig. 100a - Follow instructions on screen