Float Fault; Temperature Sensor Fault - Champion M2 Series Installation Manual

ERROR MESSAGES:

FLOAT FAULT:

1. The floats are devices inside the machine that control filling and heating. If a float
encounters a problem, then "FLOAT FAULT" and a blinking fault icon appear, (Fig. 101).
2. Press the icon and an instruction screen appears.
Follow the instructions and press RESET, (Fig. 101a).
3. The machine will resume normal operation
or the fault screen will reappear.
4. Contact a service agent for repair.

TEMPERATURE SENSOR FAULT:

1. If a machine temperature sensor fails, then the
"TEMPERATURE SENSOR FAULT" message
appears and the Wash Tank temperature displays
XXXX indicating the location of the fault, (Fig.102a).
2. Press the blinking
screen appears. Press the ACKNOWLEDGE button,
(Fig. 102b).
3. The machine will resume operation. The main screen
in this example, has a blinking
the wash tank sensor is in a fault condition, and
the tank heater is de-energized,
4. Contact a service agent for repair.
(continued)
Fig. 101a - Follow instructions on screen
fault icon and an information
fault icon indicating
(Fig. 102c).
Fig. 102c - Main screen with blinking fault icon
Fault Messages
Fig. 101 - Fault screen with blinking icon
Fig. 102 - Normal "WASHING" screen
Fig. 102a - Temperature sensor fault screen
Fig. 102b - Press ACKNOWLEGE
35