Delime Operation - Champion M2 Series Installation Manual

DELIME

DELIME OPERATION:

•
•
•
START DELIME:
• The Delime process is semi-automatic.
The operator must perform actions to
prepare the process then the machine
performs the cleaning process automatically.
1. Press the DELIME button, (Fig. 81).
2. "PROCEED WITH DELIME" screen appears.
3. Press NO to return to main screen.
4. Press YES to start delime, (Fig.82).
NOTE: Press and hold the red button for
three seconds to cancel delime and return
to the main screen.
5. If door is open,"CLOSE DOOR TO START"
appears, (Fig. 83). The red door icon in the
upper right corner of the screen alerts the
operator the door is open.
6. If door is closed when YES is pressed the screen
immediately displays "DRAINING" and the
machine drains, (Fig. 84).
7. When the machine has drained,
Open the doors and clean the scrap screens (Fig. 85).
8. "CLOSE DOOR TO FILL" appears. Note the red door
icon denoting an open door (Fig. 86).
Deliming removes mineral deposits from the machine with a deliming chemical.
The deliming process is automatic after the chemical is added to the machine.
Refer to Figs. 78 and 79 on the previous page.
(continued)
Fig. 86 - Close door to fill
Delime Operation
DELIME
Fig. 81 - Press DELIME button to start
Fig. 82 - Proceed screen
Fig. 83 - Close door to start
Fig. 84 - Machine drains
Fig. 85 - Clean scrap screens
31