Table of Contents
Advertisement
Installation
Corner Operation - Track Conversion
Follow the steps below to convert the track assembly for corner operation:
1.
Pull the track assembly straight up out of the machine.
2.
Rotate the track 180° and reinstall.
3.
Remove the guide attached to the track assembly, save the hardware.
4.
Reposition the guide on the right-hand side of the track assembly and secure with the
existing fasteners.
5.
Slide a dish rack through the machine to ensure it moves freely.
6.
Conversion is complete.
4
Fig. 6 - Corner track conversion
- Quick Links:
- Table of Contents
- Installation
- Drain Connection
- Manuals
Hide quick links:
Advertisement
Table of Contents
