Revision; Start Delime; Factory Setup - Champion M2 Series Installation Manual

SUPERVISOR MENUS
NOTE:
Press the 'Back-up button (◄ ◄ ).

REVISION:

1. Press the REVISION button,
(Fig. 59a) to display the program
version number installed.
2. The revision version is important for
troubleshooting and repair of the
machine.
3. The revision number, (Fig. 59b) automatically
changes when a new program is installed.

START DELIME:

1. Supervisors may start a Delime
process from this menu. Users use
the main screen to begin a Delime.
2. Press START DELIME to begin a
deliming operation, (Fig. 60).
3. The supervisor delime setup is on
page 29.

FACTORY SETUP

1. FACTORY SETUP CAN ONLY
BE ACCESSED BY FACTORY
PERSONNEL, (Fig. 61).
2. Contact Factory if this function is
required.
(continued on next page)
Revision, Start Delime, Factory Setup - Supervisor Menus
Fig. 61 - Factory Setup not available for supervisors.
Fig. 59a - Revision
Fig. 59b - Revision Version
Fig. 60 - Start delime
25