Fault; Fault Icon Legend - Champion 64 PRO Series Operation, Cleaning And Maintenance Manual

FAULTS
• A 'RED STATUS' indicates a problem that must be fixed to resume normal operation.
• The operator can fix some problems, others require a service technician.
• If a fault icon is visible at start up, then press the fault icon to identify and fix the problem.
• Troubleshooting instructions are displayed to guide the operator in fixing a problem.
• Some faults can be bypassed then a service agent should be called.
• Fatal faults will prevent the machine from operating until a service agent resolves the issue.
Icon
1
2
3
4
5
6
7

FAULT ICON LEGEND

Description
Status Bar - Located at top of screen. Red = Fault condition alerting operator that
DOOR OPEN - located in the
machine section where the fault
has occurred.
Yellow triangle in machine
section shows where fault has
occurred. Press triangle to
access troubleshooting menu.
Acknowledge Fault - located in
the troubleshooting menu.
Call for Service - located in
the troubleshooting menus.
"Screen Forward or Backward"
located in the lower right corner of
fault menus.
"Main Screen" - located in the
lower right corner of fault menus
and other information sections.
Table 3
DOOR OPEN
Door Open Fault
Fig. 24 - Fault icons.
Function
a problem has occurred.
Prevents operation if not resolved. Close the
door and/or fix defective components.
Perform the steps in the troubleshooting
instructions. In some cases, the problem
can be bypassed or a service company must
be called.
Press the icon to confirm the fault has
occurred. Home screen will reappear. The
service phone number may appear if the
problem requires service.
Press the icon to access the service
agent phone number.
Press the button to go forward or backward
one page in the instructions.
Press the button to return to the main
operating screen.
Fault Status Bar
Thermistor Fault
Acknowledged Fault
Machine is running
with with a fault. Fix
as soon as possible.
Faults
27