Rinse Aid Signal For Dispensing System By Others - Champion M2 Series Installation Manual

Installation

Rinse aid Signal for Dispensing System by others.

Rinse-aid
R /A
Fig. 20 - Rinse aid injection point
• 120VAC FUSE BLOCK
• 2.0 AMP MAX LOAD RINSE AID SIGNAL CONNECTION.
• LOCATED ON LEFT SIDE OF COMPONENT PANEL
• SIGNAL ENABLED DURING RINSE CYCLE.
12
CAUTION:
Warewashing chemicals are supplied by
others. Always follow supplier's instructions
for proper handling and use.
SIGNAL ONLY
Fig. 21- Rinse aid signal connection