Cycle Count; Manuals - Champion M2 Series Installation Manual

Supervisor Menus - Active Faults, Cycle Count, Manuals
SUPERVISOR MENUS
ACTIVE FAULTS:
(continued)
2. A green light indicates no fault, a red
light indicates a fault is active, (Fig. 56).
3. Active faults are displayed on the
operator's main screen. See the
Operation Manual for details.

CYCLE COUNT:

1. Press the CYCLE COUNT button
to display the total cycles run
since commissioning, (Fig.57a-b).
2. The cycle count cannot be reset.
NOTE:
Press the 'Back-up button (◄ ◄ ).

MANUALS:

1. Press the MANUALS button to
display operating and cleaning
instructions, (Fig. 58).
24
(continued)
Fig. 56- ACTIVE FAULTS screen
Fig. 57a- CYCLE COUNT button
Fig. 46 - Active faults menu
Fig. 57b- Cycle count display
Fig. 58 - Manuals