Supervisor Menus; Enter Supervisor Menu; Enter Chemical Setup Menu - Champion M2 Series Installation Manual

Supervisor Menus - Optional Champion Chemical Dispenser Set-up
Optional Champion Chemical Dispenser Set-up
Instructions for the Supervisor and Chemical Supplier
DISHWASHER START-UP:
1. Check chemical containers are full; pick-up tubes installed.
2. Turn water supply on.
3. Turn power on.
4. Push green start button, (Fig. 24).
5. Operation screen appears, (Fig. 25).

SUPERVISOR MENUS

ENTER SUPERVISOR MENU:

1. Chemical set-up is performed using the supervisor menu.
To enter the supervisor menu:
2. Press the SETTINGS button, "gears", (Fig. 25).
3. The Supervisor Menu appears, (Fig. 26).
Navigation Buttons:
•
SETTINGS: Press for Supervisor Menu
•
Back-up to previous screen.
•
Return to main screen.

ENTER CHEMICAL SETUP MENU:

1. Press 'SETUP OPTIONS' button, (Fig. 26).
2. Password screen appears, (Fig. 27).
3. Press 7777, then 'ENT' on keypad, (Fig. 28).
4. Press 'CHEMICAL SETUP' button, (Fig. 29).
(continued on next page)
16
(continued)
Fig. 24 - Dishwasher power switch
Fig. 25 - Settings button
Fig. 26 - Supervisor Menu
Fig. 27 - Enter password
Fig. 28 - Keypad
Fig. 29 - Set-up options menu