Temp Setpoints; Function Test; High Booster - Champion M2 Series Installation Manual

SUPERVISOR MENUS
MAINT:
(continued)

TEMP SETPOINTS:

1. Press the Temp Setpoints
button, (Fig. 67a).
2. A menu appears showing
the factory default Temperature
Setpoints for the wash tank =
168ºF/76.6ºC, and the
Booster = 191ºF/83.3ºC. These
are adjustable by pressing the
numeric values
3. Actual Temperatures appear below
and indicate the current temperatures
during a wash and rinse cycle. These
are not adjustable, (Fig. 67b).
Press the 'Back-up button (◄ ◄ ).

FUNCTION TEST:

1. Press the Function Test
button, (Fig. 68).
2. A menu appears to test the displayed
components on the screen. Press
and hold the button to test if the
component is working. Troubleshoot
the problem or contact an authorized
service agent for assistance.
Press the 'Back-up button (◄ ◄ ).

HIGH BOOSTER:

1. Press the High Booster button,
(Fig. 69).
2. Menu appears to test displayed
components. Press and hold
button to test component operation.
3. Contact service agent if problem.
(continued on next page)
MAINT (Maintenance) - Supervisor Menus
(continued)
Fig. 67a- Maintenance menu
Fig. 67b- Temperature Setpoints menu
Fig. 68- Function Test menu
Fig. 69- High booster menu
27