R
Setup
Follow these steps to prepare the PROM files:
1.
2.
3.
4.
www.BDTIC.com/XILINX
46
Open iMPACT: Start->Programs->Xilinx ISE 6->Accessories ->iMPACT.
Under Operation Mode Selection, select Prepare Config...Files, then click Next.
Under Prepare Configuration Files, select PROM File, then click Next.
Under Prepare PROM Files, shown in
♦
Select the Xilinx PROM with Design Revisioning Enabled radio button.
♦
Under PROM File Format, select the MCS radio button.
♦
In the PROM File Name box, enter a filename of your choice.
♦
In the Location box, browse to or enter the directory where your bitstreams are
located.
♦
Click Next.
Figure 4-9: Prepare PROM Files
www.xilinx.com
Chapter 4: Configuration
Figure
4-9, select the following:
Virtex-4 ML455 PCI/PCI-X Board
UG084 (v1.0) May 17, 2005
UG084_c4_09_012805