Subscribe to Our Youtube Channel
Related Manuals for Xilinx Virtex-4 FX12
Summary of Contents for Xilinx Virtex-4 FX12
- Page 1 Getting Started with the PowerPC and MicroBlaze Development Kit - Virtex-4 FX12 Edition UG092 (v1.6) June 2, 2008...
- Page 2 Xilinx reserves the right to make changes, at any time, to the Design as deemed desirable in the sole discretion of Xilinx. Xilinx assumes no obligation to correct any errors contained herein or to advise you of any correction if such be made. Xilinx will not assume any liability for the accuracy or correctness of any engineering or technical support or assistance provided to you in connection with the Design.
-
Page 3: Table Of Contents
............12 PPC/MicroBlaze Dev Kit-Virtex-4 FX12 Ed www.xilinx.com... - Page 4 PPC/MicroBlaze Dev Kit-Virtex-4 FX12 Ed UG092 (v1.6) June 2, 2008...
-
Page 5: Preface: About This Guide
Guide Contents This manual contains one chapter: • “Getting Started with the PowerPC and MicroBlaze Development Kit - Virtex-4 FX12 Edition.” Additional Resources To search the database of silicon and software questions and answers, or to create a technical support case in WebCase, see the Xilinx website at: http://www.xilinx.com/support. -
Page 6: Online Document
Cross-reference link to a location Figure 2-5 in the Virtex-4 Red text in another document User Guide. Go to http://www.xilinx.com Blue, underlined text Hyperlink to a website (URL) the latest speed files. www.xilinx.com PPC/MicroBlaze Dev Kit-Virtex-4 FX12 Ed UG092 (v1.6) June 2, 2008... -
Page 7: Getting Started With The Powerpc And Microblaze Development Kit
Quick Start to Flashing the LEDs This development kit comes with a number of pre-installed demonstrations and examples, as well as additional reference designs and application notes on the Xilinx web site. This kit includes a CF card that includes the demonstrations listed below: •... -
Page 8: Board Setup
Tutorial. Board Setup Position the ML403 board so that the Virtex-4 and XILINX logos are oriented near the top edge of the board. Confirm that the power switch, located in the upper right corner of the board, is in the off position. - Page 9 Select File → Properties. Select the Connect To tab. Select COM1 in the Connect using: field. Click Configure..X-Ref Target - Figure 2 UG092_02_052108 Figure 2: HyperTerminal Setup and Properties PPC-MicroBlaze Dev Kit-Virtex-4 FX12 Ed www.xilinx.com UG092(v1.6) June 2, 2008...
- Page 10 Web Server (Using Soft Ethernet MAC - ML401/ML402), pg 15 Web Server (Using Hard Embedded Tri-Mode Ethernet MAC - ML403/ML405), pg 18 DSP48 (ML401/ML402), pg 21 Linux (ML403/ML405), pg 22 www.xilinx.com PPC-MicroBlaze Dev Kit-Virtex-4 FX12 Ed UG092(v1.6) June 2, 2008...
-
Page 11: Quick Start To Installing The Software
The PowerPC and MicroBlaze Development Kit – Virtex-4 FX12 Edition includes a Xilinx Software Development Suite DVD in the box, or user can dowload the software from the Xilinx software registration site. In both cases, the software must be registered as part of the installation process. -
Page 12: Register And Install Kit
After the registration process is completed, an installation code will be presented. Use this code to install the software off the Xilinx Software DVD in the Kit or use it with the software that was downloaded from the Xilinx software registration and download site.
Need help?
Do you have a question about the Virtex-4 FX12 and is the answer not in the manual?
Questions and answers