INSTALLATION AND CONNECTION
4.1.1 Durchsteckmontage
•
•
NOTICE
Legend
1
Mounting wall
2
Fixing with screw and spacer
3
Recess in housing cover and M4 screw heads
Figure 17:
Push-through mounting
The spacer is not included or available as an accessory.
1)
It must be worked with a spacer that fits into the recess of the housing cover and
bridges the M4 screw head height of min. 4 mm.
Only the specified fastening materials may be used,
=>
„4.1
Mounting".
Damage to the housing cover
► Clamping against the housing cover is not permitted.
► Clamping on the M4 screw heads is not permitted for push-through
mounting.
min. 4 mm
②
①
through the mounting wall
1)
③
57