Table of Contents
Advertisement
SYSTEM AND MODULE DATA
3.2 System and module data
3.2.1 System weight
System weight information =>
3.2.2 Electrical system data
Electrical system data
DC input voltage range
Limited operation 1
Limited operation 2
DC rated input voltage
DC switch-off level „Error! Underpotential"
DC switch-off level „Error! Overpotential"
Rated power
Maximum power for 60s
DC rated input current
Nominal DC input current
Maximum DC input current for 60s
Table 8:
NOTICE
NOTICE
„2.1.1 System
Electrical system data
The DC rated input current at the HV DC input corresponds to the sum of the
currents of the active drive modules.
Destruction of the drive modules
The individual drive modules must be controlled by way that the maxi-
mum DC input current is not exceeded.
Defect due to overload
Protective measures against overload of the HV supply lines and pro-
tection for the T6
APD
The following fuse has been tested to protect the T6
SIBA Part number: 20 713 32.280 (Type aR 900 V DC / 280 A)
Test mains: 750 V DC, SCCR: 30 kA.
To ensure the effectiveness of the protective measures in error case, it
is always necessary to consider the entire system in order to determine
the appropriate protective measures. Incorrect dimensioning does not
ensure the correct response time of the protective devices.
architecture".
/ V
U
in_HV_dc
U
/ V
HV1_dc
/ V
U
HV2_dc
U
/ V
N_HV_dc
/ V
U
UP_dc
U
/ V
OP_dc
/ kW
P
N
P
/ kW
_max
I
/ A
in_HV_dc
I
/ A
N_HV_dc
/ A
I
_max_HV_dc
system shall be provided.
520...750
200...520
750...820
565
180
820
60
90
Σ I
in_HV_dc_drive modules
I
<
_max_HV_dc
120
180
system:
APD
37
Advertisement
Table of Contents
