Table of Contents
Advertisement
CONNECTION Of THE CONTROL
4.4.2 Connection plug for X1A
The following plug-in connection is not included in the scope of delivery. It is assembled
by the vehicle manufacturer.
Manufacturer data accessories
Connector manu-
facturer
Internet
Name
Part No.
Numbers of pins
Name
Part No.
Cable cross-section according to manufacturer's
specification
Insulation diameter according to manufacturer's
specification
Mating cycles
Optional accessories
Name
Part No.
Figure 37:
TE connectivity
www.te.com
AMP SEAL PLUG socket
770680-1
23-poles
Crimp contacts
770854-3
Semi-shell
776464-1
Coupling for control connector X1A
The indicated article numbers are to be understood as an example. The crimp
contacts suitable for the intended purpose must be approved by the vehicle
manufacturer. Gold-plated crimp contacts must be used.
A minimum cross section of 1 mm
X1A.2.
0.5 mm
- 1.25 mm
2
1.7 mm - 2.7 mm
≤ 25
Special feature
is required 2x
is recommended for terminals X1A.1 and
2
/ AWG 20-16
2
77
Advertisement
Table of Contents
