Motor Connection; Figure 25: Wiring Between Motor And T6 - KEB COMBIVERT T6APD Instructions For Use Manual

CONNECTION Of THE POWER UNIT

4.3.2 Motor connection

Legend
1 KEB COMBIVERT T6
2 Motor connector (not included in the scope of delivery)
3 Motor cable , place the shield on both sides and over a large surface to the functional earth
1)
4 Double shielding, if cable for temperature monitoring is integrated in the motor cable
5 Three-phase motor (observe the connection instructions of the motor manufacturer)
6 Temperature monitoring
Figure 25: Wiring between motor and T6
A low-capacitance cable must be used. The maximum permissible total cable length per connection is 30m.
1)
=> „4.3.2.5 Motor cable
64
1
4
B
C
D
APD
APD
length".
➄ ➅
U
V
W