Table of Contents
Advertisement
CONNECTION Of THE POWER UNIT
4.3.2.4 Motor connector for inverter module C
The following plug-in connection is not included in the scope of delivery. It is assembled
by the vehicle manufacturer or directly ordered from the specified connector manufac-
turer.
Manufacturer data accessories
Connector manufacturer
Website
Name
Number of poles
Protection class (locked)
Mating cycles
Part No. Cable connector
Cable diameter range cable connector
Part No. Pin contact motor connection
Crimp range motor connection
Part No. Pin contact temperature monitoring
Crimp range temperature monitoring
Figure 29:
1)
2)
68
1) 2)
Coupling motor connector for inverter module C
The interface is not waterproof in disassembled state.
Water can be transported into the device through a capillary effect of the cable. The
opposite side (motor terminal box, motor windings) should be designed in accord-
ance with the necessary IP protection degree.
The indicated article numbers are to be understood as an example. The crimp
contacts suitable for the intended purpose must be approved by the vehicle
manufacturer.
Phoenix Contact
www.phoenixcontact.com
Cable connector M40x1,5-Hy-
brid
2+3+PE
IP67, IP6k9k
≤ 100
1627076
20.5 mm - 26.5 mm
1623386 (is required 4x)
16 mm
2
1623613 (is required 2x)
1 mm
- 1.5 mm
2
2
Advertisement
Table of Contents
