Table of Contents
Advertisement
USB3.0 Board Level Camera
User Manual
·
Figure 11-18 Set Digital Gain
11.10 Set Brightness
The camera brightness refers to the brightness when the camera adjusts image under Once or
Continuous exposure mode, or Once or Continuous gain mode. You can set brightness as shown
below.
You should enable Once or Continuous exposure mode, or Once or Continuous gain mode first
before setting brightness.
Click Analog Control > Brightness, and set Brightness according to actual demand, and its range is
from 0 to 255.
Figure 11-19 Set Brightness
49
Advertisement
Table of Contents
Need help?
Do you have a question about the USB3.0 and is the answer not in the manual?
Questions and answers