Cleaning Procedure - Cambria® Natural Quartz Surface - Structural Concepts Impulse 62486 Operating Manual

CLEANING PROCEDURE - CAMBRIA® NATURAL QUARTZ SURFACE
Overview - Cambria® Natural Quartz Surface

Cambria is created from pure natural quartz,
an extremely hard stone crystal, mined
directly from the earth. In fact, quartz is the
hardest non-precious stone to be found in
the earth's surface.

Cambria is non-porous, making cleanup easy
and preventing food and moisture from
penetrating its surface (the main source of
growth for harmful bacteria).

Cambria has been certified by NSF International for use as a food
preparation surface.
Cleaning - Cambria® Natural Quartz Surface
Clean as often as desired with warm water and a pH neutral, non-abrasive
cleaner such as Formula 409® or Simple Green®. Rinse with clear, clean
water. No sealing, buffing or re-polishing is necessary.
Other guidelines to observe:
For dried spills, use a wet cotton cloth.

Avoid bleach, alkaline (high pH) cleaners such as oven cleaner, abrasive

cleaners such as Comet®, Soft Scrub® products, or other products
containing pumice, SOS® pads, and other similar products, paint removers,
furniture strippers, tarnish or silver cleaners or the like.
Do not apply any sealers, penetrants or topical treatments to Cambria® under

any circumstances.
Natural stone surfaces can be damaged by sudden and rapid change of

temperature especially near the edges, as well as direct or sustained heating
of the top.
Cambria® may not withstand the direct transfer of heat from pots and pans

and other cooking units such as electric frying pans and griddles, and some
crock-pots or roaster ovens and heat lamps. Therefore, the use of a hot pad
or trivet is always recommended.
Cambria® will resist stains from fruit juices, food coloring, coffee, tea, wine,

grape juice, nail polish and felt tip markers.
63