Electrical Hookup / Electrical Layout - Structural Concepts Impulse 62486 Operating Manual

ELECTRICAL HOOKUP / ELECTRICAL LAYOUT [MAY SLIGHTLY DIFFER DEPENDING UPON LINEUP]
2. Use Flat-Head or Phillips™
Screwdriver to Remove Screws
Holding Front Cover in Place
1. Front
Panel to
be Lifted
Up and
Off
Electrical Hookup shown below is to Model
CB2CE.4764
1. Front Panel is to be lifted up and off.
2. Use flat-head or Phillips™ screwdriver to remove
screws holding front cover in place.
3. View of electrical box after front cover removed.
4. Enlarged view of electrical box after front cover
removed.
Note: See wiring diagram section in manual for specifics.
Main Electrical Box (for
Field Wiring of Entire
Island (or Lineup) of Cases
1. Lift Front Panel Up and Off
to Access Electrical Box
60
Note: Illustrations
below may slightly differ
from your electrical box
layout depending upon
case lineup.
4. Enlarged view of
electrical box after
front cover removed
3. View of electrical
box after front cover
removed