Notes On The Watchdog Function; Note On Dma Transfer; Note On The Key-On Wake Up Function - Renesas Emulation Pod M37641T2-RPD-E User Manual

Notes on the Watchdog Function:

• The MCU's watchdog timer can be used only while a program is being executed. To use it
otherwise, disable the watchdog timer.
• If the reset circuit of the target system has a watchdog timer, disable it when using the emulator.

Note on DMA Transfer:

• When using the DMA transfer function, pay attention to the following.
(1) Breaks are not executed during the DMA transfer. Break are executed after the DMA transfer
(2) The DMA transfer is not executed while a break is executed.
(3) The DMA transfer cannot be executed on the emulation memory. It is possible to transfer only
(4) In the result of the real-time trace, RD and WR signals during the DMA transfer cycle

Note on the Key-on Wake Up Function:

• The key-on wakeup interrupt is accepted only during STP command or WIT command execution.
The interrupt is not accepted in any other situations.
IMPORTANT
is finished.
from the area set to "EXT" to the area set to "EXT" by MAP settings.
displayed as fixed "H". (RD and WR signals output from the MCU change correctly.)
( 13 / 68 )