Table of Contents
Advertisement
Nesis III User's Manual
Alarm text Edit or enter a new text to be shown on the screen.
Voice file Select the voice file to be played when alarm is on. Voice will be
played only if Voice option is selected for mode.
Test voice plays selected voice file. This is used to check if the selected file
is the correct one.
Activity defines a condition when an alarm is active.
• Always means that the alarm is always active.
• With engine means that the alarm is active only when engine is
running.
8.6
Brightness
The brightness icon is used to change the display brightness in range Nesis
always starts with maximal 100% brightness. Brightness is selected in 10%
steps.
When Nesis runs on a backup battery (when such option is installed) it is
highly recommended to reduce brightness to 80% or less. This will signifi-
cantly increase the run time available on the backup battery.
8.7
Audio
The Audio icon is used to change the audio level output for Nesis warnings.
Figure 73 illustrates an example. The Test option is used to play a test file
and the Volume sets the volume level in 10% steps.
Figure 73: The audio level window.
99
8.6 Brightness
© Kanardia 2018-2022
Advertisement
Table of Contents
