Table of Contents
Advertisement
Nesis III User's Manual
○
Various status symbols. More details are given next.
9
Various symbols can appear on the symbol section of the status bar.
GPS Symbols
These symbols show health of the GPS receiver and reception of the GPS
satellites.
A flashing red satellite symbol indicates an error. It means that
communication with GPS receiver was lost.
A grey symbol indicates that GPS is working, but position is not
available.
A cyan/gray color symbol indicates that only 2D fix is available
– position is know, but its precision is limited.
A cyan color symbol indicates that full 3D fix is available.
This cyan color symbol indicates that precision of position is
further enhanced with some augmentation system (WAAS, EG-
NOS, etc.)
Flarm Symbols
These symbols appear only when some of Flarm devices is connected to the
Nesis. If none of the symbols is shown, it means that communication was not
established successfully.
A gray Flarm symbol indicates that communication with Flarm
device was established, but Flarm is still not ready.
A gray symbol with cyan triangle indicates that Flarm received
its own GPS signal, but Flarm internal radio module is not ac-
tive/not working.
A gray triangle with cyan arcs indicates that Flarm radio is work-
ing, but Flarm GPS signal is not yet available or Flarm GPS is
not working.
A full cyan symbol indicates that Flarm is working properly.
A flashing red symbol indicates that Flarm has experienced an
internal error and it may not be working properly or it does not
work at all.
23
3.4 Status Bar
© Kanardia 2018-2022
Advertisement
Table of Contents
