Table of Contents
Advertisement
Nesis III User's Manual
○
Relative wind indication. Wind direction and speed are shown below
6
○
Flap indication and trim indications.
7
○
Slip indication.
8
○
Engine power section in the shape of round arc. Status lights on the left
9
are shown in the case of Rotax iS or ULPower engines only. Engine RPM
arc with totalizer and manifold pressure. During flight, the totalizer is
not shown. A touch on the RPM arc will show totalizer for a couple of
seconds.
○
Engine pressure section.
10
○
Engine temperature section. When multiple sensors are used for the
11
same parameter (EGT, for example) all bars are shown and the highest
value is given below. If there is enough space, then the lowest value is
also shown.
○
Electric section, voltage and current.
12
○
Fuel computer values. A touch on this toggles the values.
13
○
Fuel tank combination. Left and right tank and sum of both below.
14
3.10.1
Modern Screen with Moving Map
There are two modern screens. The first one has an AHRS for the background
like shown in Figure 15. The second one has a moving map for the background,
an example is given in Figure 16.
3.10.2
Video
If Nesis is equipped with video option, then the modern screen with AHRS
background also shows video image in the corner. This video image can be
enlarged (over most of the screen, as shown on Figure 17) or shrinked to the
corner with a simple touch on the image. Video can be also removed.
3.11
Screen Elements
Nesis screens have several different elements that can be combined into one
screen. Each of these elements have some specific features.
1
The wind indication is shown only when MAGU is connected to the CAN bus.
38
3.11 Screen Elements
© Kanardia 2018-2022
1
.
Advertisement
Table of Contents
