New Traffic' Messages - Kanardia Nesis III User Manual

Nesis III User's Manual
Figure 46: Left: a part of the main map screen, which shows the Flarm device
status rectangle. Right: Flarm Error and Warning window. On top
errors and warnings are displayed and the Acknowledge command
at the bottom.
• In the main map window, touch the small Flarm status window. This
opens the acknowledge window.
• Open the Options page with the icons, select the ADSB/Flarm icon and
select the Errors & Warnings item. Note this item is shown only when
an error or a warning is detected.
Please refer to the device documentation for the complete list of errors and
warnings.
5.5.1

'New traffic' messages

When a new traffic is detected by the device and the traffic is close enough,
Nesis may indicate it visualy or audibly. These specific settings are done in a
window as shown on Figure 47.
Figure 47: An example of setting for the new traffic message.
74
5.5 Errors
© Kanardia 2018-2022