Table of Contents
Advertisement
Nesis III User's Manual
• Select one of remaining route waypoints in direct to mode. Nesis will
navigate directly to this waypoint and once the waypoint is reached, it
will resume with route navigation.
• Select one of the remaining route legs. Nesis will select this leg as a new
active leg. This can be used to switch to the next leg early. Note that
legs that were already completed can't be selected.
4.6
Adjusting Fuel Level
This option is available only when no fuel level sensors are connected to the
EMS unit (DAQU) and Nesis calculates the fuel remaining from the fuel flow
information.
Note that such way of fuel level indication is highly speculative and may lead
to very inaccurate results. Never fully trust this indication.
Fuel level is first adjusted during the Nesis start-up procedure. Later, you
can adjust it during the flight.
4.7
Setting Pitch Correction
A change in the cruising speed results in a different pitch angle. In order to
correct the pitch, a correction value can be entered. Figure 41 shows a pitch
correction window.
Figure 41: An example of the pitch correction window.
Note that this value is not permanently stored and Nesis always starts with
zero pitch correction.
If you want to adjust the pitch, please refer to the Intallation manual.
4.6 Adjusting Fuel Level
63
© Kanardia 2018-2022
Advertisement
Table of Contents
