Table of Contents
Advertisement
Nesis III User's Manual
''New Traffic'' message gives four options: Disable – do notthing, Text
& Voice gives a textual and audial indication of new traffic, Text only
shows only text and Voice only plays only audial message.
Aircraft ID timeout defines how long does it take for an aircraft to be
forgotten. When aircraft ID is not being received for this given time, it
will be marked as forgotten and if it appears again later, a new warning
will be given.
Do not repeat defines the time period, which starts when the last "New
traffic" message is shown. Within this period this message will not be
repeated for any new aircraft that may appear afterwards. This was
introduced to reduce number of warnings. Please note that aircraft
symbol will still appear on the map and that all collision warnings are
still in effect regardless of this setting.
6
Engines with ECU
Some engines which have ECU connected to the Daqu are sending status and
diagnostic messages. Nesis automatically shows the status in the engine part
of the screen.
6.1
Rotax iS
Figure 48 shows examples of the horizontal and vertical engine status infor-
mation. It consists of two lanes and general status. Each lane can be green
(active) or red (inactive). You should see the light change during the test
procedure, when lanes are being checked by switching them off.
(a) Horizontal orientation.
Figure 48: Rotax iS engine status information.
(b) Vertical orientation.
75
6. Engines with ECU
© Kanardia 2018-2022
Advertisement
Table of Contents
