Table of Contents
Advertisement
Nesis III User's Manual
7.1 Show Details
Flight section gives details and some statistics about a flight.
Takeoff time when takeoff conditions were detected.
Landing time when landing conditions were detected.
Duration total flight duration.
Distance distance traveled. This is not point-to-point distance. This is a
distance of the path projected to the ground traveled during the flight.
Max IAS maximal indicated airspeed detected during flight.
Max GS maximal ground speed detected during flight.
Max Alt maximal baro-corrected altitude reached during flight.
Min Alt minimal baro-corrected altitude reached during flight.
Max Acc maximal normal acceleration reached during flight.
The engine group shows similar statistics for the engine.
Start time of engine start.
Stop time of engine stop.
Duration engine run time.
Max CHT maximal CHT reached during engine run.
Max RPM maximal RPM reached during engine run.
Avg RPM average RPM measured during engine run.
Fuel used during engine run.
Avg fuel average fuel consumption during engine run.
Please note that the fuel used and average fuel consumption strongly depend
on the fuel flow measurement/estimation. If fuel flow is wrong, these two
items will be wrong, too.
© Kanardia 2018-2022
80
Advertisement
Table of Contents
