Table of Contents
Advertisement
Nesis III User's Manual
In order to create above mentioned route, follow the steps:
• Select the New option from Figure 35 left.
• Nesis asks you for the departing (takeoff) airfield. Search for LJCL and
select it.
• Next, Nesis asks for arrival (landing) airfield. Search for LHFM and
select it.
• A window shown on Figure 37 left appears. The window shows both
airfields and an item labeled as New in-between.
• Select the New item to add MW1, MUREG and SASAL waypoints in
sequence. All these are VFR waypoints, so select VFR or All when
asked for a waypoint type.
• The final situation is shown on Figure 37 right. The item labeled as
New will be removed from the final route automatically.
• Close windows. Note that a new route is not activated automatically.
It must be activated manually.
Figure 37: Route at the beginning, when only takeoff and landing airfields are
known (left) and route at the end, when all intermediate points are
entered (right).
57
4.5 Route
© Kanardia 2018-2022
Advertisement
Table of Contents
