Table of Contents
Advertisement
Nesis III User's Manual
Figure 28: Round pressure indicator, with special markings shown on needles.
Please note that availability of these special markings strongly depends on a
sensor type, DAQU channel type in on channel function type. Usually only a
sub-set of above mentioned conditions can be detected.
4
Flight Time Activities
This section describes procedures that are mainly used during flight. The
major flight-time activities are accessible from the main menu.
4.1
Main Menu
A push on the knob brings up the main menu. This happens on all screens.
Figure 29 shows the main menu for the Classic Screen. Some other screens
may have less options.
A swipe in upward direction on the touch screen will also open the main
menu.
Opens a QNH editor window. See section 4.2 for more details.
QNH
Radio Standby Opens a window, which allows setting a new standby fre-
quency on the radio. The option is only visible when Nesis and radio
are properly connected. See section 4.3 for more details.
Waypoint Opens a window for a waypoint selection and manipulation. See
section 4.4 for more details.
4. Flight Time Activities
49
© Kanardia 2018-2022
Advertisement
Table of Contents
